profileqert.blogg.se - Ip camera network scanner

#Ip camera network scanner install

Note that the most reliable solution is to have one dedicated WiFi access point for each WiFi camera. If that's not possible place a WiFi repeater mid-way between your WiFi access point and your WiFi camera(s).

#Ip camera network scanner install

If the signal quality is poor install a second WiFi access point.

Make sure the wireless signal is acceptable.Update the WiFi access point / WiFi repeater firmware.Reduce the camera frame-rate and/or video resolution (if not possible in ContaCam do that in camera web interface).If a network camera keeps restarting displaying from time to time the Cannot connect to camera message or if the video stream shows smearing or other artifacts, then follow the below steps. Now copy the URL shown under the live video and paste it into ContaCam's Camera - Network / IP Camera dialog under Camera IP or Hostname or URL:ģ. Press Refresh, select your camera and click the Live video link. Install and run the free ONVIF Device Manager, Log in providing your camera credentials.Try also this great source of information.In your camera documentation or on the producer homepage.

If also those Generic choices are not working then search the stream address (as URL).

If your camera is not listed under Camera Maker and Protocol try all the Generic possibilities.

Always remember to set the correct Camera Port, for RTSP that's usually 554 and for HTTP it's 80.

To achieve that enter your router / modem web interface and search the network connections section which permits the management of the assigned IP:

If your camera only supports dynamic IP assignment through DHCP then either use the network name instead of the IP address or instruct your router / modem to always assign the same IP to your camera.

After installing one of those programs on your PC, run it to find the camera IP by looking at the Manufacturer or Company column.

If there is no installation software then run a network scanner, for example there are the free Advanced IP Scanner or Wireless Network Watcher.

Some cameras are supplied with an installation CD, run the setup and if possible set a static IP for your camera.